1. ∷ 承插管帽、管箍概述

        名 称: 承插焊管件/Socket welded Pipefittings
        规 格: DN6~DN100 (1/8"~4")
        压 力: SCH80,SCH160,XS,XXS,3000LB,6000LB,9000LB
        材 质: 碳钢(CS)、 不锈钢(SS)、 合金钢(AS)
        类 型: 弯头、三通、四通、管箍、活接头、管帽、斜三通、半管接头以及各类异形非标接头
        工 艺: 锯切、热处理、模锻、机加工
        标 准: ASMEB16.11、GB/T14383-2008、MSS SP-83、BS3799

        承插管帽 承插管箍 承插管帽 承插管箍
        承插管帽
        承插管箍
          
        Socket Cap
        Socket Coupling
          

        公称通径
        Nominal
        Diameter

        承插孔
        深度
        Depth of Socket
        承插孔
        直径
        Dimension of Socket
        壁厚
        Wall Thickness
        管帽顶厚
        End Wall Thickness
        中间长度
        The length of midst
        中心至承插孔底
        Center to Bottom of Socket
        Cmin
        Kmin
        双承口
        管箍
        Coupling
        单承口
        管箍
        Half-
        Coupling
        45°斜三通
        Lateral
        A
        H
        DN
        NPS

        Jmin

        d1

        3000
        LB
        6000
        LB
        9000
        LB
        3000
        LB
        6000
        LB
        3000
        LB
        E
        F
        3000
        LB
        6000
        LB
        3000
        LB
        6000
        LB
        Sch80
        Sch160
        XXS
        Sch80
        Sch160
        XXS
        Sch80
        Sch160
        Sch80
        Sch160
        6
        1/8
        10
        10.7
        3.2
        3.5
        -
        5.0 6.5 - 6 16 - - - -
        8 1/4 10 14.1 3.3 4.0 - 5.0 6.5 - 6 16 32 - 8 -
        10 3/8 10 17.5 3.5 4.4 - 5.0 6.5 - 6 17 37 - 8 -
        15 1/2 10 21.8 4.1 5.2 8.2 6.5 8.0 11.0 10 22 41 51 11 13
        20 3/4 13 27.4 4.3 6.1 8.6 6.5 8.0 12.5 10 24 51 60 13 14
        25 1 13 34.2 5.0 7.0 10.0 9.5 11.0 14.0 13 29 60 71 14 18
        32 1.1/4 13 42.9 5.3 7.0 10.6 9.5 11.0 14.0 13 30 71 81 18 21
        40 1.1/2 13 48.3 5.6 7.8 11.2 11.0 12.5 16.0 13 32 81 98 21 25
        50 2 13 61.1 6.1 9.5 12.2 12.5 16.0 19.0 19 41 98 120 25 29
        65 2.1/2 16 76.9(73.8) 7.7 12.5 - 16.0 19.0 - 19 43 - - - -
        80
        3 16 89.8 8.3
        13.8
        -
        19.0 22.0 - 19 45 - - - -
        100
        4
        19
        115.5
        9.4
        -
        -
        22.0 28.5 - 19 48 - - - -

        备注:
        承插壁厚外围平均值不低于所列值,最小值仅限于局部区域。
        Note:
        Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.

        备注:
        1、承插壁厚外围平均值不低于所列值,最小值仅限于局部区域。
        2、每种规格的上下值分别代表最大、最小尺寸。
        Note:
        1、Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.
        2、Upper and lower values for each size are the respective maximum and minimum dimensions.

        必威体育betway
        进口管件法兰